It is currently 24 Nov 2020 09:56

Reply to topic  [ 2 posts ] 
 Hello from Scotland 
Author Message
registered user

Joined: 09 Apr 2020 07:43
Posts: 2
Post Hello from Scotland

I am a fairly new bass player and discovered these designs a few years ago. They caught my interest as I am also an audio enthusiast and I am interested in using a fearful cabinet partly for it's own sake but also to experiment with amp and cab simulations which need a full range cab.

I already have the 3015LF, a 6ND410 and most of the crossover components. I'm here primarily to discuss building a cabinet from metric plywood. If the imperial dimensions are converted from 0.5 inch to 12mm then you end up with a cabinet that is smaller than the original by 28.7mm width and 41.3mm height. I've produced a cut list with a more accurate conversion. I'll be searching the forums for any discussion on using metric plywood boards and I might start a thread to discuss this in detail if nothing already exists.

Thanks for reading this


09 Apr 2020 10:33
User avatar

Joined: 28 Apr 2011 09:12
Posts: 3810
Location: Jacksonville, FL USA
Post Re: Hello from Scotland

If you use the free plans for cabs / xovers, please consider a modest wee big donation to keep the site going.


“There is a way to escape the inference of superluminal speeds and spooky action at a distance... particle A, already ‘knows’ what that measurement, and its outcome, will be.”

09 Apr 2020 12:17
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

powered by phpBB® forum software © phpBB Group, designed by ST Software for PTF